Our New Houses at 1630 and 1632 N Gilmor St., Baltimore: Saturday October 15th, 2011

Work continues smoothly on both our houses at 1630 and 1632 N Gilmor St, Baltimore, MD. We had yet another Team Build session come out Friday October 14th, where a specific group from Northrop Grumman ES volunteered together on their day off. We are continually grateful for the amount of groups interested in assisting our efforts in renovation these two houses. We also had a good sized group come out on Saturday to pick up right where the Friday team left off.

The Friday team worked hard and got half of the joists placed and stop-blocked for the second floor. We are using 2" by 10" solid wood instead of the I-beams we were using on the last two houses. This makes the joists much heavier but allows us to space the joists further apart and require less wood to build a solid structure. Stop blocks are then cut into 22" sections and placed along the framing to keep the joists spaced at exactly 2 feet intervals. The stop blocks also help keep the joists from twisting and moving when combined with bracket spacers in the middle of the joists. Once the joists are in place, subfloor sheets of plywood are glued and nailed over the joists to create a stable floor. The Friday team began laying subfloor for the second floor of 1632 N Gilmor St.

On Saturday the volunteer crew picked up right where the houses were left off at and finished laying joists for the the second floor of 1630, and finished most of the second floor subfloor in 1632. One problem that had to be tackled in both houses was framing the front wall of both houses, and getting a stable structure up against the front wall for the subfloor so that the framing of the rest of the front of the house would also be stable. Although it took some time and care due to the presence of windows and the front door, we came up with good solutions. And so progress can continue when we get back to work November 5th.

Here Dave Fine (who took these pictures) nails in a stop block.